Woodworking Calculators & Cut List Tools
Plan sheet and linear cuts with kerf included, size cabinet parts, lay out face frames and generate full-size drilling templates. Results are intended to move directly into a cut list, test piece or shop layout.
Plywood Cut Calculator
Nest an arbitrary parts list onto sheets to minimize waste, with a visual cutting layout you can print.
Linear Cut List Optimizer
Optimize cutting a list of lengths from stock bars/boards, minimizing offcuts and stock used.
Board Foot Calculator
Calculate board feet and total cost for dimensional lumber.
Miter Angle Calculator
Find the miter saw angle for a regular-shape frame or a custom corner angle.
Drawer Box Calculator
Size a drawer box from the cabinet opening and slide length, then send the parts to a cut optimizer.
Cabinet Door Calculator
Calculate stile, rail and panel sizes for a rail-and-stile cabinet door, then send parts to a cut optimizer.
Kerf Bend Calculator
Calculate saw-kerf count, spacing and depth for a curved panel, then export a full-size marking layout.
Pocket-Hole Screw Calculator
Calculate a recommended pocket-hole screw length from joint geometry and warn if it would blow through the base workpiece.
Segmented Bowl Calculator
Calculate miter angle, trapezoid edge lengths and kerf-aware stock length for a segmented turning ring.
Shelf Pin Layout Calculator
Generate a full-size, printable shelf-pin drilling template at the 32 mm system pitch or a custom pitch.
Shelf Sag Calculator
Estimate center deflection of a shelf under a uniform or center point load from span, dimensions and modulus of elasticity.
Bay-Window Miter Set
Find matching miter-saw settings and trim long-point offsets for polygon corners or measured bay-window turns.
Drawer-Slide Clearance
Size a drawer box from cabinet opening dimensions and editable side, top, bottom and rear slide clearances.
Cabinet Door Collision
Check two perpendicular corner cabinet doors at chosen opening angles with a top-view collision diagram.
Face Frame Layout
Divide a cabinet face frame into equal openings and generate an optimizer-ready stile and rail cut list.
Drawer Pull Template
Calculate centered knob or pull holes and print a full-scale drawer-front drilling template.
Hinge Cup Template
Lay out editable concealed-hinge cup centers and screw holes on a full-height printable door template.