Herramientas prácticas para trabajos de precisión
Calculadora de Ubicación de Altavoces Estéreo
Trace un triángulo estéreo centrado a partir de las dimensiones de la sala, el desplazamiento de los altavoces y la posición de escucha.
The 38% field is measured forward from the rear wall. The speaker pair is centred and capped at 80% of room width to leave side-wall clearance.
How it works
How to use it: enter the room and front speaker offset. Adjust the listening position from the rear wall; 38% is a starting point, not a rule.
Method. The calculator targets a 60-degree stereo angle, then limits separation where the room is too narrow.
Example. With a 4.2 by 5.5 m room and a seat 38% from the rear, the listener is 3.41 m from the front wall.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Room width
- 4.2 m
- Room length
- 5.5 m
- Listener from rear wall
- 38 %
- Speakers from front wall
- 0.5 m
Primary result: Speaker separation: 3.36 m.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
This is geometric placement, not acoustic optimisation. Furniture, doors, speaker directivity, boundary gain and measured bass response may justify asymmetric or non-equilateral positions.
Frequently asked questions
Must the speakers form an exact equilateral triangle?
No. A 60-degree included angle is a useful stereo baseline, then toe-in and spacing should be verified by listening and measurement.
Herramientas relacionadas
Calculadora de Modos
Enumere las resonancias axiales, tangenciales y oblicuas de la sala e inspeccione los agrupamientos cercanos de baja frecuencia.
Calculadora RT60
Estime el tiempo de reverberación de Sabine y la absorción total necesaria para un objetivo de decaimiento editable.
Autonomía del SAI
Estime la autonomía a partir de la capacidad total del banco de baterías y la carga medida del rack, comprobando tanto los vatios como los VA nominales del SAI.
Líneas de Visión
Estime la altura de cada grada necesaria para que la línea de visión libre la altura de cabeza asumida en la fila delantera.