Herramientas prácticas para trabajos de precisión
Calculadora de Modos de Sala y Ondas Estacionarias
Enumere las resonancias axiales, tangenciales y oblicuas de la sala e inspeccione los agrupamientos cercanos de baja frecuencia.
Red lines are axial modes, blue tangential, and grey oblique. Closely spaced modes can reinforce one another, but room response also depends on boundaries and placement.
How it works
How to use it: enter internal room dimensions and the mode order to enumerate. The chart sorts every axial, tangential and oblique resonance below your chosen frequency ceiling.
Formula. f = c/2 x sqrt((n/L)^2 + (m/W)^2 + (p/H)^2), using 343 m/s for sound speed. One non-zero index is axial, two tangential and three oblique.
Example. A 5.5 m room has its first length axial mode near 343/(2 x 5.5) = 31.2 Hz.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Room length
- 5.5 m
- Room width
- 4.2 m
- Room height
- 2.7 m
- Mode order
- 4
- Chart maximum
- 200 Hz
Primary result: 1,0,0 axial: 31.2 Hz.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
Rectangular rigid-boundary theory predicts modal frequencies, not exact peak/null severity. Openings, wall flex, furnishings, temperature, source/listener placement and damping change measured response. Verify with room measurements before buying treatment.
Frequently asked questions
Are axial modes most important?
They involve one room dimension and are often stronger, but tangential and oblique modes still contribute to the measured response.
Herramientas relacionadas
Ganancia de Pantalla
Calcule la ganancia de pantalla o los lúmenes entregados necesarios para un objetivo de brillo, y compare valores de ganancia habituales.
Autonomía del SAI
Estime la autonomía a partir de la capacidad total del banco de baterías y la carga medida del rack, comprobando tanto los vatios como los VA nominales del SAI.
Líneas de Visión
Estime la altura de cada grada necesaria para que la línea de visión libre la altura de cabeza asumida en la fila delantera.
Pantalla de Cine al Aire Libre
Compare los ángulos de visión del público cercano y lejano con las dimensiones de pantalla, los límites de tamaño y el brillo ideal en oscuridad.