Herramientas prácticas para trabajos de precisión
Calculadora de RT60 y Tiempo de Reverberación
Estime el tiempo de reverberación de Sabine y la absorción total necesaria para un objetivo de decaimiento editable.
A metric sabin is one square metre of perfectly absorbing surface. Real materials contribute area multiplied by their frequency-dependent absorption coefficient.
How it works
How to use it: enter internal room dimensions and estimated total absorption at the frequency band of interest. Set a target to estimate how much absorption that target requires.
Formula. Sabine RT60 = 0.161 x room volume / total absorption.
Example. A 62.4 m3 room with 35 sabins has an estimated RT60 of 0.29 seconds.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Room length
- 5.5 m
- Room width
- 4.2 m
- Room height
- 2.7 m
- Total absorption
- 35 sabins
- Target RT60
- 0.4 s
Primary result: Estimated RT60: 0.29 s.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
Sabine assumes a diffuse sound field and reasonably even absorption. Small rooms, sparse treatment, low frequencies and highly absorptive rooms can depart substantially. Use band-specific material data and confirm with a calibrated decay measurement.
Frequently asked questions
What RT60 should a home theater have?
There is no single universal target. Room size, listening use and measurement band matter, so compare against a considered design target rather than treating one number as a pass or fail.
Herramientas relacionadas
Calculadora de Modos
Enumere las resonancias axiales, tangenciales y oblicuas de la sala e inspeccione los agrupamientos cercanos de baja frecuencia.
Autonomía del SAI
Estime la autonomía a partir de la capacidad total del banco de baterías y la carga medida del rack, comprobando tanto los vatios como los VA nominales del SAI.
Líneas de Visión
Estime la altura de cada grada necesaria para que la línea de visión libre la altura de cabeza asumida en la fila delantera.
Pantalla de Cine al Aire Libre
Compare los ángulos de visión del público cercano y lejano con las dimensiones de pantalla, los límites de tamaño y el brillo ideal en oscuridad.