Herramientas prácticas para trabajos de precisión
Calculadora de Punto de Primera Reflexión
Ubique los puntos simétricos de primera reflexión en las paredes laterales con el método de fuente-espejo y coordenadas reales de la sala.
The side-wall markers come from the mirror-source method. They identify geometric specular paths at seated ear height.
How it works
How to use it: enter the speaker and listener coordinates measured from the front wall, plus each speaker inset from its side wall.
Method. Each speaker is mirrored across its adjacent wall. A straight line from listener to mirror intersects the real wall at the first reflection point.
Example. In a symmetric 4.2 m room, both wall points occur at the same distance from the front wall.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Room width
- 4.2 m
- Room length
- 5.5 m
- Listener from front
- 3.4 m
- Speakers from front
- 0.6 m
- Speaker side inset
- 0.8 m
Primary result: Left wall point: 1.37 m from front.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
This solves horizontal specular geometry only. Speaker directivity, toe-in, ceiling and floor paths, seat width, panel size and absorption bandwidth matter. Confirm with a mirror test or measurement.
Frequently asked questions
How large should a panel be?
The point is only a centre reference. Panel size should cover movement across the listening area and the relevant speaker radiation, with practical mounting tolerance.
Herramientas relacionadas
Ubicación de Altavoces
Trace un triángulo estéreo centrado a partir de las dimensiones de la sala, el desplazamiento de los altavoces y la posición de escucha.
Área de Panel
Compare el área frontal del panel y la absorción estimada con el área de superficie de la sala usando un objetivo de referencia ingresado explícitamente.
Autonomía del SAI
Estime la autonomía a partir de la capacidad total del banco de baterías y la carga medida del rack, comprobando tanto los vatios como los VA nominales del SAI.
Líneas de Visión
Estime la altura de cada grada necesaria para que la línea de visión libre la altura de cabeza asumida en la fila delantera.