Herramientas prácticas para trabajos de precisión
Calculadora de Disposición de Altavoces de Techo Dolby Atmos
Calcule las coordenadas de los altavoces cenitales de dos o cuatro canales a partir de la altura del techo, la altura del oído y el ángulo de elevación.
The plan is centred on the main listening position. Four-channel layouts place one pair forward and one pair behind; two-channel layouts place a single pair overhead.
How it works
How to use it: select two or four overheads, then enter the ear-to-ceiling geometry and preferred elevation angle.
Formula. Horizontal offset = (ceiling height - ear height) / tan(elevation angle).
Example. With a 1.65 m vertical rise and 45-degree elevation, each four-channel row is 1.65 m forward or behind the listener.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Overhead channels
- 4 overheads
- Ceiling height
- 2.7 m
- Seated ear height
- 1.05 m
- Elevation angle
- 45 deg
- Left-right spacing
- 2 m
Primary result: Front/rear offset: 1.65 m.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
This is centre-line geometry for a two- or four-overhead starting layout, not certification. Joists, angled ceilings, multiple rows and speaker dispersion can require different positions. Check the official Dolby speaker setup guide for your exact channel layout before installation.
Frequently asked questions
Can two overhead speakers go directly above the seat?
This planner centres a two-channel pair over the listening position. Speaker documentation may recommend a small forward offset depending on the system and room.
Herramientas relacionadas
Ángulos Surround
Trace posiciones simétricas de altavoces 5.1 o 7.1 a partir de ángulos de escucha de referencia y un radio editable.
Ubicación de Altavoces
Trace un triángulo estéreo centrado a partir de las dimensiones de la sala, el desplazamiento de los altavoces y la posición de escucha.
Autonomía del SAI
Estime la autonomía a partir de la capacidad total del banco de baterías y la carga medida del rack, comprobando tanto los vatios como los VA nominales del SAI.
Líneas de Visión
Estime la altura de cada grada necesaria para que la línea de visión libre la altura de cabeza asumida en la fila delantera.