Framing cost calculator

Use purchased quantities, including your waste allowance, and prices from the same currency. Stud cost is count × price; plate cost is purchased metres × price per metre. Add header material, connectors, crew hours × hourly cost and other work. The example inputs total 200 in materials and 200 in labor before markup or tax.

Markup is added to cost; it is not profit margin. Tax is applied to either marked-up materials or the entire marked-up subtotal as selected. Enter the tax treatment that applies to your quote; this worksheet does not determine local tax rules.

Wall framing layout and quantity calculator

The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.

Studs to purchase

20

Price per stud

5

Plate length to purchase

10 m

Plate price per metre

3

Header and opening material allowance

50

Fastener and connector allowance

20

Crew labor hours

8

Cost per crew labor hour

25

Other project costs

0

Markup on cost

0 %

Entered tax rate

0 %

Tax base assumption

Materials including their markup

Primary result: Material cost: 200.

• Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
• Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
• When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.

Example prices are arbitrary arithmetic fixtures, not market rates. Enter a complete approved takeoff; this tool does not select structural member sizes or infer permits, demolition, delivery, equipment, supervision or subcontract costs. Count crew hours consistently with the entered crew hourly rate.