Praktische tools voor nauwkeurig werk
Projector Projectieafstand & Throw Ratio Calculator
Bereken de afstand van lens tot scherm, de throw ratio of de schermdiagonaal met een schaalgetrouw optisch diagram.
How it works
How to use it: choose the unknown, then enter screen aspect ratio and the other two optical values. Throw distance is measured from the projector lens to the screen plane.
Formula. Throw ratio = lens-to-screen distance / image width. Screen width is derived from diagonal and aspect ratio.
Example. A 120-inch 16:9 screen is about 104.6 inches wide. At 1.20 throw ratio the lens sits about 125.5 inches from the screen.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Solve for
- Throw distance
- Screen diagonal
- 120 in
- Lens-to-screen distance
- 144 in
- Throw ratio
- 1.2
- Aspect width
- 16
- Aspect height
- 9
Primary result: Throw distance: 125.5 in.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
This is neutral first-order optics. Real projectors have model-specific zoom ranges, lens shift, offsets, focus limits and chassis clearances. Confirm the result inside the chosen projector's official installation manual before mounting.
Frequently asked questions
Why measure from the lens?
Throw ratio describes the optical path from lens to image plane, not distance from the projector's rear panel.
Gerelateerde tools
Projectiescherm Formaat
Vind het grootste beeld dat past binnen je projectieafstand, throw ratio en bruikbare wandhoogte.
Projectorhelderheid
Schat foot-lamberts op basis van geleverde lumens, schermformaat en gain, of bereken omgekeerd het benodigde lichtoutput.
UPS Overbruggingstijd
Schat de overbruggingstijd op basis van de totale accucapaciteit en gemeten rackbelasting, met controle van zowel het UPS-wattage als het VA-vermogen.
Zichtlijnen Zitplaatsen
Schat de rijverhoging die nodig is per zichtlijn om over een aangenomen hoofdhoogte in de rij ervoor heen te kunnen kijken.