Praktische tools voor nauwkeurig werk
Projectorhelderheid & Foot-Lamberts Calculator
Schat foot-lamberts op basis van geleverde lumens, schermformaat en gain, of bereken omgekeerd het benodigde lichtoutput.
How it works
How to use it: enter screen size, rated lumens, an estimated delivered-output percentage, screen gain and your comparison target. This keeps marketing output separate from the lumens assumed to reach the screen.
Formula. Foot-lamberts = delivered lumens x gain / screen area in square feet. Approximate cd/m² = fL x 3.426. Reverse rated lumens also accounts for the entered delivery percentage.
Example. A 2500-lumen projector modeled at 70% output delivers 1750 lumens before screen gain and area are applied.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Screen diagonal
- 120 in
- Aspect width
- 16
- Aspect height
- 9
- Rated lumens
- 2500
- Estimated delivered output
- 70 %
- Screen gain
- 1
- Target brightness
- 16 fL
Primary result: Estimated screen brightness: 41.0 fL.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
This is an idealized uniform-screen estimate. Calibration mode, zoom, lamp/laser age, optical losses, screen directionality, ambient light, contrast and measurement position affect the real image. Measure the installed system when brightness matters.
Frequently asked questions
Why include delivered-output percentage?
Rated maximum output may not match the calibrated picture mode you use. The editable percentage makes that uncertainty explicit.
Gerelateerde tools
Projectiescherm Formaat
Vind het grootste beeld dat past binnen je projectieafstand, throw ratio en bruikbare wandhoogte.
Projector Projectieafstand
Bereken de afstand van lens tot scherm, de throw ratio of de schermdiagonaal met een schaalgetrouw optisch diagram.
UPS Overbruggingstijd
Schat de overbruggingstijd op basis van de totale accucapaciteit en gemeten rackbelasting, met controle van zowel het UPS-wattage als het VA-vermogen.
Zichtlijnen Zitplaatsen
Schat de rijverhoging die nodig is per zichtlijn om over een aangenomen hoofdhoogte in de rij ervoor heen te kunnen kijken.