Herramientas prácticas para trabajos de precisión
Verificador de Abertura y Holgura de Ventilación para Refrigerador
Compare el gabinete de un refrigerador con su abertura medida y las holguras editables laterales, superiores y traseras del fabricante.
Use the clearances from the exact appliance installation manual; defaults are examples, not universal ventilation requirements.
How it works
The checker subtracts the appliance case and each entered installation clearance from the measured opening. Positive margins remain available; negative margins show the shortage.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Opening width
- 38 in
- Opening height
- 72 in
- Opening depth
- 30 in
- Refrigerator width
- 36 in
- Refrigerator height
- 70 in
- Refrigerator case depth
- 29 in
- Required left clearance
- 0.5 in
- Required right clearance
- 0.5 in
- Required top clearance
- 1 in
- Required rear clearance
- 1 in
Primary result: Opening result: Fits.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
Case depth is not total depth with doors and handles. This check does not verify electrical, water, anti-tip, door-hinge, wall, island or delivery-route requirements. Follow the exact manufacturer installation guide.
Frequently asked questions
Should I include the refrigerator doors in depth?
Use case or cabinet depth for the opening check, then separately verify door, handle and hinge swing against nearby walls and counters.
Herramientas relacionadas
Holgura de Lavavajillas
Verifique las holguras del cuerpo del lavavajillas y de la puerta completamente abierta contra el pasillo disponible.
Verificador de Ruta de Sofá
Evalúe las orientaciones de sofá de pie, de espaldas y de punta primero contra un vano de puerta y la holgura más estrecha de la ruta.