Herramientas prácticas para trabajos de precisión
Plantilla de Intersección de Ramal de Tubería con Desvío
Genere un perfil de intersección de ramal de tubería de envoltura completa con un desvío de eje con signo y un ángulo de ramal.
Calcule el diseño, revise el diagrama y luego imprima el resultado para el taller o la obra.
Signed shift toward the template's 90° mark; use a negative value for the opposite side.
Print at 100%, verify the PDF calibration mark, align the 90° guide toward the entered positive offset, wrap around the branch, and trace the red curve.
How it works
This develops the theoretical intersection of two cylindrical outside surfaces when the branch axis is shifted sideways from the main pipe centerline. At each branch circumference station, the calculator solves the cylinder-intersection quadratic and unwraps the resulting axial cut position.
A zero offset reduces to the ordinary centered fishmouth. The signed offset makes the two sides asymmetric, so the 90° orientation mark matters when wrapping the template.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Main pipe outside diameter
- 200 mm
- Branch outside diameter
- 80 mm
- Angle between pipe axes
- 90 deg
- Branch-axis offset
- 25 mm
Primary result: Wrap length: 251.3 mm.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
The MVP produces a complete single-valued wrap curve only when |offset| + branch radius ≤ main radius. It models outside surfaces and intersecting axis directions; it does not compensate for wall thickness, bevel, weld gap, ovality, kerf, branch reinforcement or a non-penetrating lateral.
Frequently asked questions
Why was my geometry rejected?
At larger offsets, some branch generators do not reach the main cylinder, so the joint no longer has one continuous wrap-around saddle curve. That requires a different partial-intersection workflow.
Herramientas relacionadas
Plantilla de Muescado
Genere una plantilla a tamaño real en boca de pez (fishmouth) o silla de montar para la intersección teórica entre dos tubos.
Descuento de Accesorios
Reste las dimensiones de centro a extremo de los accesorios (takeoff), suministradas por el usuario, de las medidas de campo para hallar la longitud de corte de tubería.
Calculadora de Tolerancia de Plegado
Calcule la tolerancia de plegado, la deducción de plegado y el retroceso (setback) para un pliegue en chapa metálica, con un diagrama.
Patrón Plano de Cono
Genere el patrón plano (desarrollo) de un cono truncado a partir de sus diámetros superior/inferior y su altura.