ToolHuts

Herramientas prácticas para trabajos de precisión

Verificador de Ruta de Sofá por Puerta y Pasillo

Evalúe las orientaciones de sofá de pie, de espaldas y de punta primero contra un vano de puerta y la holgura más estrecha de la ruta.

in
in
in
in
in
in
in
Straight-route resultViable orientation found
Best orientationOn back, length through doorway
Door-side margin6.0in
Height margin44.0in
Hall margin8.0in

This is a conservative rectangular-envelope screen. A positive result is a candidate route, not a delivery guarantee.

Cómo funciona

The sofa is tested upright, on its back and end-first. Each orientation must clear the door width and height and the route’s narrowest horizontal clearance.

Ejemplo con los datos actuales

El resultado anterior utiliza exactamente estos valores. Esta captura se incluye al imprimir para cotejar la salida con las medidas originales.

Sofa length
84 in
Sofa depth
36 in
Sofa height
32 in
Clear door width
38 in
Clear door height
80 in
Hallway width
42 in
Narrowest turn clearance
40 in

Resultado principal: Straight-route result: Viable orientation found.

Antes de usar el resultado

  • Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
  • Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
  • When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.

Limitaciones

Real sofas are not rectangular boxes and complex pivots can sometimes pass when this conservative check says no - or fail because of frames, legs, railings, ceiling slopes or an L-shaped turn. Measure the actual removable parts and every route segment; use a cardboard profile when close.

Preguntas frecuentes

Can I remove the feet or cushions?

Yes. Enter the resulting rigid-frame dimensions only if those parts can genuinely be removed before moving.