Herramientas prácticas para trabajos de precisión
Verificador de Abertura y Holgura de Giro de Puerta para Lavavajillas
Verifique las holguras del cuerpo del lavavajillas y de la puerta completamente abierta contra el pasillo disponible.
Installation fit and door-swing clearance are checked independently.
Cómo funciona
The body check compares the required clearances with the opening. The swing check compares the horizontal reach of the fully open door and handle with the unobstructed aisle.
Ejemplo con los datos actuales
El resultado anterior utiliza exactamente estos valores. Esta captura se incluye al imprimir para cotejar la salida con las medidas originales.
- Opening width
- 24 in
- Opening height
- 35 in
- Opening depth
- 24 in
- Dishwasher width
- 23.5 in
- Dishwasher height
- 34 in
- Dishwasher depth
- 23 in
- Left clearance
- 0.25 in
- Right clearance
- 0.25 in
- Top clearance
- 0.5 in
- Rear clearance
- 0.5 in
- Open door reach
- 27 in
- Handle projection
- 1 in
- Clear aisle depth
- 36 in
Resultado principal: Overall result: Fits.
Antes de usar el resultado
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitaciones
Use the exact product installation drawing. This does not check leveling range, hoses, plumbing, electrical, countertop attachment, adjacent drawer pulls or accessibility/code clearances.
Preguntas frecuentes
What should I verify before using this result?
Recheck the physical measurements, confirm that every input uses the displayed unit, and compare the result with the applicable drawing, product specification, code requirement or test piece.
Why might the finished result differ?
Real work can include thickness, kerf, seams, tolerances, hardware allowances, installation clearances or site conditions that are outside the calculation. The limitations section identifies the main exclusions for this tool.
Herramientas relacionadas
Holgura de Refrigerador
Compare el gabinete de un refrigerador con su abertura medida y las holguras editables laterales, superiores y traseras del fabricante.
Verificador de Ruta de Sofá
Evalúe las orientaciones de sofá de pie, de espaldas y de punta primero contra un vano de puerta y la holgura más estrecha de la ruta.