Rechner für TV-Montagehöhe & VESA-Position

How to use it: measure seated eye height and eye-to-screen distance. Choose a small upward sight angle if the screen centre must sit above eye level, then enter the manufacturer's VESA-centre offset.

Formula. Screen centre height = eye height + tan(sight angle) x viewing distance. Screen top and bottom add or subtract half the physical panel height.

Example. With a 65-inch TV, 40-inch eye height and zero-degree sight line, the centre is 40 inches high; the visible panel runs roughly 24.1 to 55.9 inches.

The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.

TV diagonal

65 in

Seated eye height

40 in

Eye-to-screen distance

96 in

Sight angle above horizontal

0 deg

VESA centre offset from screen centre

0 in

Primary result: Screen centre height: 40.0 in.

• Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
• Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
• When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.

This calculates sight-line and screen geometry, not safe mounting. Use the TV and bracket drawings for chassis dimensions, VESA location and fasteners; verify wall structure, services, bracket capacity and local requirements before drilling.