Vérificateur de Passage de Canapé par Porte & Couloir

The sofa is tested upright, on its back and end-first. Each orientation must clear the door width and height and the route’s narrowest horizontal clearance.

The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.

Sofa length

84 in

Sofa depth

36 in

Sofa height

32 in

Clear door width

38 in

Clear door height

80 in

Hallway width

42 in

Narrowest turn clearance

40 in

Primary result: Straight-route result: Viable orientation found.

• Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
• Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
• When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.

Real sofas are not rectangular boxes and complex pivots can sometimes pass when this conservative check says no - or fail because of frames, legs, railings, ceiling slopes or an L-shaped turn. Measure the actual removable parts and every route segment; use a cardboard profile when close.