Herramientas prácticas para trabajos de precisión
Calculadora de Techo y Cabios para Gazebo Poligonal
Calcule los cabios comunes y de limatesa en línea central, la elevación, los ángulos de planta y el área de cada cara del techo para techos regulares de 3 a 16 lados.
Calcule el diseño, revise el diagrama y luego imprima el resultado para el taller o la obra.
Measure one outside wall face of a regular polygon.
Centerline lengths run from the wall or fascia polygon to the central apex. Apply the ridge block, seat and tail details from the framing plan before cutting.
How it works
Enter the number of equal wall sides and the length of one side. The apothem is the horizontal common-rafter run; the center-to-corner radius is the hip plan run. Roof pitch converts those plan runs into true centerline lengths.
Worked example: an eight-sided gazebo with 2000 mm wall sides and a 6-in-12 pitch has a 2414.2 mm wall apothem and about 1207.1 mm of rise before the overhang is applied.
Current-input example
The result above uses these exact values. This snapshot is included when the page is printed so the output can be checked against the original measurements.
- Number of sides
- 8
- Wall side length
- 2000 mm
- Pitch rise
- 6
- Pitch run
- 12
- Horizontal overhang
- 300 mm
Primary result: Hip rafter centerline: 2878.5 mm.
Before using the result
- Measure from the datum or reference edge described by this tool, and do not mix inside, outside and centerline dimensions.
- Keep inputs in the displayed units and preserve more precision than the final cutting or purchasing tolerance requires.
- When the result is close to a limit, verify it with a test piece, field measurement, manufacturer drawing or qualified project professional.
Limitations
This assumes a regular polygon with a central apex and one common pitch. It does not size structural members or deduct ridge blocks, seats, tails, fascia, birdsmouths or member thickness. Check the actual wall polygon corner-to-corner before cutting rafters.
Frequently asked questions
Does side length include the overhang?
No. Enter the wall side length and the horizontal overhang separately. The tool projects the roof perimeter outward from the wall polygon.
Herramientas relacionadas
Limatesa/Lima Hoya/Corto Avanzado
Calcule los cortes de asiento y los cortes de mejilla compuestos de los cabios de limatesa, lima hoya y cortos, más allá de la simple longitud y el ángulo a plomo.
Calculadora de Pendiente de Techo
Visualice la pendiente del techo como elevación/recorrido, en grados y con un diagrama de triángulo a escala.
Calculadora de Espaciado de Balaustres
Ingrese la abertura de la baranda, el ancho del balaustre y el espacio máximo que planea usar para calcular una distribución de espaciado uniforme.
Espaciado de Tablas de Cerca
Trace el espaciado de las tablas de la cerca a lo largo de un tramo, con un diagrama en vivo de la sección de cerca terminada.